Retrieve Alarm All - Symmetricom TimeSource 3600 User Manual

Chapter 4 TL1 Reference
Commands

Retrieve Alarm All

This command displays all current system alarms. The command format is:
RTRV-ALM-ALL:[<tid>]:ALL:<ctag>;
If there are no alarms:
M
;
If there is at least one alarm:
M
<ocrdat>,<ocrtm>,,:\"<conddescr>\""...
;
Refer to Chapter 5, Troubleshooting
recommended action.
152 TimeSource 3600 User's Guide
<sid> <date> <time>
<ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
<sid> <date> <time>
<ctag> COMPLD
"<aid>:<ntfcncde>,<condtype>,<srveff>,
/*LINK:<link>,CMD:<command>*/
for a list of all <conddescr> messages and the
097-72060-01 Revision J – June, 2007