Retrieve Gps Status - Symmetricom TimeSource 3600 User Manual

Chapter 4 TL1 Reference
Commands

Retrieve GPS Status

This command displays the position of the GPS receiver, UTC time, and status
information for each of the GPS satellites in view. The command format is:
RTRV-GPS-STAT:[<tid>]:GPS:<ctag>;
Response Format:
M
;
Parameter
LAT=a
LONG=a
ALT=a
UTC=a
ANTMODE=a
MERIT=a
SUCCESS=a
SAT=a
166 TimeSource 3600 User's Guide
<sid> <date> <time>
<ctag> COMPLD
"<aid>:LAT=a,LONG=a,ALT=a,UTC=a
ANTMODE=a,MERIT=a,SUCCESS=a%
SAT-a,USE=a,CNO=a,ELEV=a,AZ=a,
LOCK=a..."
/*LINK:<link>,CMD:<command>*/
Value
a = dd.mm.fffN
a = dd.mm.fffS
a = ddd.mm.fffE
a = ddd.mm.fffW
a = mm.mmm
a = hh-mm-ss
a = AUTO
a = MANUAL
a = bbb
a = bb
a = 1 to 25
Description
Current latitude north in degrees, minutes,
and decimal-fractions of a minute
Current latitude south in degrees, minutes,
and decimal-fractions of a minute
Current longitude east in degrees,
minutes, and decimal-fractions of a minute
Current longitude west in degrees,
minutes, and decimal-fractions of a minute
Altitude in meters to the thousandth of a
meter, referenced to mean sea level
Universal Coordinated Time (UTC), where
hh is hours (00 to 23), mm is minutes (00
to 59), and ss is seconds (00 to 59)
Automatic survey-in mode
Manual survey-in mode
Timing error estimate in ns
Percentage of time satellites are visible
Satellite identification number
097-72060-01 Revision J – June, 2007