Symmetricom TimeSource 3600 User Manual page 111

Procedure 3-7. TimeWizard Installation and Operation (Continued)
Step
20. Choose the alarm parameters as desired. When you are finished modifying the alarm
parameters described below, click Next>>.
Setting and Description
Severity 1 – The initial severity of the alarm.
Service Affecting 1 – The initial service affecting status of the alarm condition.
Time to Severity 2 – If the Escalate Alarm check-box is selected, the alarm will be escalated
to the severity and service affecting status selected under Severity 2 and Service Affecting
2, after the time period selected under Hours and Mins has been reached. If the Escalate
Alarm check-box is not selected, the alarm will not be escalated.
Severity 2 – The severity of the alarm after it has been escalated.
Service Affecting 2 – The service affecting status of the alarm condition after the alarm has
been escalated.
21. The "View the Alarm Parameters" screen appears.
This screen confirms the alarm parameter settings from the previous screen.
If the settings are correct, click Next>> to continue. If the settings are not correct, click
<<Back to return to the "Set the Alarm Parameters" screen, and correct the settings.
097-72060-01 Revision J – June, 2007
Chapter 3 Installing the TimeSource 3600
Procedure
TimeSource 3600 User's Guide 111
Installing and Using TimeWizard