Symmetricom TimeSource 3600 User Manual page 139

Aid Parameter
TS3600 IPEM1PORT=a
(cont'd) (See Note: 1,
Note: 2, Note: 3)
IPEM2=a.b.c.d
(See Note: 1,
Note: 2, Note: 3)
IPEM2PORT=a
(See Note: 1,
Note: 2, Note: 3)
IPINACT=a
(See Note: 1)
ALARM=x
SPAN ALARM=x
A & B
TS3600, TIME=x
SPAN
A & B
097-72060-01 Revision J – June, 2007
Value
a = 0 to 65535 Port address of primary element manager (port
for IPEM1 address)
a = 0 to 255 IP address of alternate element manager (if
used) (port 5550 connects to this element
b = 0 to 255 manager if connection cannot be made to the
primary element manager)
c = 0 to 255
d = 0 to 255
a = 0 to 65535 Port address of alternate element manager
(port for IPEM2 address)
a = 0 to 10000 Port 5550 closes the connection to the Element
Manager if no autonomous messages are sent
during this number of 100-ms units (0 to
10,000, where 0 deactivates the timer, for
example, 100 = 10 s)
x = HOLDOVER alarm
HOLDOVER
x = GPS GPS alarm
x = LOS LOS alarm
x = AIS AIS alarm
x = ERROR ERROR alarm
x = HH-MM Hour (00-999) and minute (00-59) time to
escalate alarm
x = 0 No alarm escalation
Chapter 4 TL1 Reference
Commands
Description
TimeSource 3600 User's Guide 139