Samsung WEC8500 Operation Manual page 151

WEC8500/8050 Operation Manual

overwrite-vlan

no overwrite-vlan

vlan-support

no vlan-support

native-vlanId

no native-vlanId
Parameter
DESCRIPTION
OVERWRITE-APC-AP-TIMER
ECHO-INTERvAL
DISCOVERY-INTERVAL
REPORT-INTERVAL
STATISTICS-TIMER
RETRANSMIT-INTERVAL
MAX-ECHO-RETRANSMIT
OVERWRITE-TELNET-SSH
TELNET-ENABLE
SSH-ENABLE
OVERWRITE-CONSOLE
CONSOLE-ENABLE
OVERWRITE-DTLS
DTLS-POLICY
OVERWRITE-LED-CONTROL
Samsung Electronics America
This contains a brief description of the AP group.
If overwrite-apc-ap-timer is enabled, the APC-AP timer setting of
the group is applied to all APs within the group.
Configures the time when an echo request message is
transmitted to the APC where an AP joins (unit: seconds).
Configures a waiting time until the CAPWAP discovery response
message is received (unit: seconds).
Configures the time interval for transmitting the description error
from AP to the APC (unit: seconds).
Configures the time interval for transmitting the statistical
information provided by the CAPWAP (unit: seconds).
The APC waits for this length of time before retransmitting an
echo request message when there is no response. The APC sets
double the length of echo-interval as the echo timeout time. If no
echo message is received from the AP for as long as double the
length of the echo-interval, the APC judges that the AP is down
(unit: seconds).
The APC waits for this length of time before retransmitting an
echo request message when there is no response. The APC sets
double the length of echo-interval as the echo timeout time. If no
echo message is received from the AP for as long as double the
length of the echo-interval, the APC judges that the AP is down
(unit: seconds).
If overwrite-telnet-ssh is enabled, the telnet and SSH settings for
the AP group are applied to all APs within the group.
This enables the telnet server and configures telnet port of the
AP.
This enables the SSH server and configures SSH port of the AP.
If overwrite-console is enabled, the telnet and SSH settings of
the AP group are applied to all APs within the group.
This configures whether to allow console access to the AP.
If overwrite-dtls is enabled, the DTLS settings of the AP group
are applied to all APs within the group.
Configures the DTLS Policy of an AP.
If overwrite-led-control is enabled, the LED settings of the AP
Description
Version 5.2
page 151 of 533