WEC8500/8050 Operation Manual
add-ntp [NTP_SERVER_ADDRESS]
no add-ntp [NTP_SERVER_ADDRESS]
ntp-interval [NUMBER]
3) Configure the method of transmitting the time information to an AP as 'ntp'.
mode ntp
4) Use the 'show apc ap-time-config' command to check the configured information.
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration>, select <NTP> in the
submenu, and then select a time setting mode of the AP (TimeStamp or NTP), timestamp
interval, and NTP polling interval. Also, you can add/remove NTP server from which to
fetch time access information for the AP.
Samsung Electronics America
Figure 74. AP Time Synchronization Configuration Options
Version 5.2
page 162 of 533