WEC8500/8050 Operation Manual
6.1.3
802.11ac Configuration
The 802.11ac configuration is as follows:
Configuration using CLI
1) Go to configure radio mode of 80211a to configure.
WEC8500# configure terminal
WEC8500/configure# 80211a
2) Enter 11ac-support mode.
WEC8500/configure/80211a#11ac-support
3) Configure the AP so that it can support the 802.11ac property.
WEC8500/configure/80211a/11ac-support# enable [AP_ID]
Parameter
4) Configure the Modulation and Coding Scheme (MCS) rate.
WEC8500/configure/80211a/11n-support# mcs [RATE] ap [AP_ID]
Parameter
RATE
AP_ID
5) To check the configured 11ac-support information, use the 'show 80211a radio-config
ap[AP_ID]' command.
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration> and then select
<Access Points> <802.11a/n/ac> or <Radio> <802.11a/n/ac> <802.11n/ac> in
the submenu.
An example of selecting 802.11a/n/ac is shown below.
Samsung Electronics America
AP_ID
MSC rate (range: 0-23)
ID of the AP (range: 1-500)
Description
ID of the AP (range: 1-500)
Description
Version 5.2
page 241 of 533