WEC8500/8050 Operation Manual
Configuration using Web UI
To configure the FTP/SFTP server configuration, in the menu bar of <WEC Main window>,
select <Administrator> and then select the <FTP-SFTP> menu in the sub-menus.
The FTP and SFTP can be configured using the Enable/Disable radio box.
For FTP, you can configure a port number that will be used for FTP by using 'PORT' and
can change the user name and password of a FTP server by entering 'USER',
'PASSWORD', or 'CONFIRM PASSWORD'. Enter an idle timeout value in 'IDLE
TIMEOUT'.
Also for SFTP, you can change the user name and password of a SFTP server by entering
'USER', 'PASSWORD', or 'CONFIRM PASSWORD'.
Samsung Electronics America
Figure 194. FTP/SFTP server configuration
Version 5.2
page 372 of 533