Figure 33. Vrrp-Operation Window - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Network>  <VRRP> menu in the sub-menus.
The VRRP menu provides two sub menus, i.e. Operation and Circuit Failover.
[Operation]
When you click the <Enable>/<Disable> button, you can Enable or disable VRRP.
In addition, when you click the <Add> or <Delete> button, you can add or delete VRRP
configuration.
[Circuit Failover]
When you click the Circuit Failover menu, the VRRP list is displayed on the window.
To perform detail configuration, select one of VRRP items.
After selecting a configuration you want select the <Apply> button to apply the
configuration.
Samsung Electronics America

Figure 33. VRRP-Operation Window

Figure 34. VRRP-Circuit Failover Window (1)
Figure 35. VRRP-Circuit Failover Window (2)
Version 5.2
page 107 of 533