Samsung WEC8500 Operation Manual page 368

Controller
Hide thumbs Also See for WEC8500:
Table of Contents

Advertisement

WEC8500/8050 Operation Manual
Parameter
Configure the version of a server that a NTP client will refer to. (Use a default value 1 if it
is not configured.)
ntp client server-addr hostname <WORD> version [1-4]: Enable
no ntp client server-addr hostname <WORD> version [1-4]: Disable
[Configuring based on IP address]
Enable or disable.
ntp client server-addr ip <A.B.C.D>: Enable
no ntp client server-addr ip <A.B.C.D>: Disable
Configure the index of a server that a NTP client will refer to. (Use a default value 1 if it is
not configured.)
ntp client server-addr ip <A.B.C.D> index [1-5]: Enable
no ntp client server-addr ip <A.B.C.D> index [1-5]: Disable
Configure the version of a server that a NTP client will refer to. (Use a default value 1 if it
is not configured.)
ntp client server-addr ip <A.B.C.D> version [1-4]
no ntp client server-addr ip <A.B.C.D> version [1-4]
You can proceed with configurations simultaneously as shown below.
ntp client server-addr hostname <WORD> index [1-5] version [1-4]
ntp client server-addr hostname <WORD> version [1-4] index [1-5]
ntp client server-addr ip <A.B.C.D> index [1-5] version [1-4]
ntp client server-addr ip <A.B.C.D> version [1-4] index [1-5]
no ntp client server-addr hostname <WORD> index [1-5] version [1-4]
no ntp client server-addr hostname <WORD> version [1-4] index [1-5]
no ntp client server-addr ip <A.B.C.D> index [1-5] version [1-4]
no ntp client server-addr ip <A.B.C.D> version [1-4] index [1-5]
Samsung Electronics America
INDEX
Description
Server index (range: 1-5)
Version 5.2
page 368 of 533

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wec8050

Table of Contents