Samsung WEC8500 Operation Manual page 189

WEC8500/8050 Operation Manual
4.2.8.5 Restarting and Upgrading AP
After downloading the AP package, APs in the remote group are restarted so that they can
run on the upgraded version.
Configuration using CLI
Example:
WEC8500# configure terminal
WEC8500/configure# remote-ap-group rUpgrade
WEC8500/configure/remote-ap-group rUpgrade# reboot upgrade
CLI for checking configuration:
WEC8500# show remote-ap-group upgrade config rUpgrade
================== Remote Ap Group Upgrade Config =================
Group Name
Enable
Type
Mode
Path
PortNum
MAXretries
ForceOption
weafama
weafamb
WEC8500/configure/remote-ap-group rUpgrade/upgrade# show remote-ap-
group upgrade list rUpgrade
/* (RC/FR/RC) : RetryCount/FailReason/RebootCause
AP_ID
1 WEA303i
2 WEA312i
3 WEA303i
Samsung Electronics America
: rUpgrade
: Enable
: Default
: FTP
: package/ap
: 21
: 3
: Disable
: ap_1 (APID:1, IP:10.10.10.160)
: weafama_1.7.0.U.bin (1.7.0.U)
: (APID:0, IP:0.0.0.0)
: ()
Model Version(config/current) Status(RC/FR/RC)
Remote/1.7.0.U
Remote/1.7.0.U
Remote/1.7.0.U
Success( 0/ 0/128) MasterApCfg
Success( 0/ 0/146) -
Success( 0/ 0/146) -
Version 5.2
MasterAp
page 189 of 533