Managing Traffic Performance - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual

10.5 Managing Traffic Performance

You can manage the traffic performance statistics information and accumulated data for the
APC system and the interface of each AP.
10.5.1 Managing History Information
When the traffic performance information management is enabled, the APC system creates
history information at every 5 minute. But, if the FTP server information is not configured,
the history information is not transmitted to outside although it is created.
Collecting information
1) Go to configure mode of CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Configure the traffic performance information.
WEC8500/configure# stats-report enable
3) Configure a FTP server to transmit history information.

stats-report target ip [IP_ADDRESS] port [PORT_NUMBER] id [ID] password
[PASSWORD] path [PATH]
Parameter
IP_ADDRESS
PORT_NUMBER
ID
PASSWORD
PATH
4) To check the information of traffic performance information management, use the
'show stats-report conf' command.
5) Configure so that the performance information is uploaded to the FTP server.
But, because the default is the 'start' status, this step may be skipped.
WEC8500/configure# stats-report upload start
Samsung Electronics America
IP address of a target server
Port number of a target server
User ID of a target server
User password of a target server
File storage path of a target server
Description
page 396 of 533
Version 5.2