Samsung WEC8500 Operation Manual page 192

WEC8500/8050 Operation Manual
Maximum 16 WLANs can be allocated to each AP group.
WEC8500# configure terminal
WEC8500/configure# ap-group apg_01
WEC8500/configure/ap-group apg_01# add-wlan 1
3) Configure an interface group to which the WLAN service will be provided.
Several VLAN interfaces can be added to an interface group, and the WLAN service is
available only through the interface.

if-group [INTERFACE_GROUP_NAME]
4) Configure a SSID. The SSID is an ID used to connect to each wireless terminal to
provide the WLAN service.
Make sure to configure a SSID to use the WLAN service.

ssid [SSID_NAME]
5) Configure radio by selecting 2.4G, 5G or All (2.4G/5G).

radio [Radio ID: 1: 5 GHz, 2: 2.4 GHz, 3: ALL]
6) Configure whether to apply the WLAN service.
WEC8500/configure/wlan 1#enable
Samsung Electronics America
A newly created WLAN is added to the 'default' AP group if the WLAN ID is in the
range of 1-16. If its WLAN ID is 17 or above, the WLAN is not included in the AP
group.
To apply the various WLAN services to multiple wireless terminals, create the
WLAN service in a profile format. Once the WLAN service is started, make each
AP use the WLAN service by downloading the profile.
Version 5.2
page 192 of 533