Operator Authentication Through Interoperation With Tacacs+ Server - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
8.7 Operator Authentication through
Interoperation with TACACS+ Server
A W-EP wireless LAN system provides an operator authentication function by
interoperating with an external TACACS+ server.
8.7.1 Configuring External TACACS+ Server
A W-EP wireless LAN system provides an operator authentication function by
interoperating with an external TACACS+ server and the procedure detailed below is
carried out for interoperation with a TACACS+ server.
8.7.1.1 Basic Settings
The default configuration of the TACACS+ server is as follows:
Configuration using CLI
1) Go to configure  security  tacacs configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# security
WEC8500/configure/security# tacacs 1
WEC8500/configure/security/tacacs 1#
2) Configure the IP address of the TACACS+ server.
WEC8500/configure/security/tacacs 1# server-ip [IP_ADDRESS]
Parameter
IP_ADDRESS
3) Set the public key of the TACACS+ server.
WEC8500/configure/security/tacacs 1# shared-secret [KEY_STRING]
Parameter
KEY_STRING
4) Configure the port number of the TACACS+ server.
WEC8500/configure/security/tacacs 1# server-port [PORT_NUMBER]
Samsung Electronics America
Description
IP address of the TACACS+ server
Description
Public key of the TACACS+ server
Version 5.2
page 360 of 533