Samsung WEC8500 Operation Manual page 222

WEC8500/8050 Operation Manual
[Ping check]
When a DHCP server allocates an IP address to a client, ping check can be used to check if
an IP address to allocate is being used in the current network.

ping-check [enable/disable]
Parameter
enable/disable
[Configuring IP Address Range]
A DHCP server configures the range of IP address to allocate to a client. The range of IP
address to add is up to 16 and the IP address specified in the range cannot be duplicated
with the IP address of fix-address. Enter 'no' to delete the range of configured IP address
and enter 'no range all' to delete all the ranges.

range [IP_ADDRESS]

range [IP_ADDRESS1] [IP_ADDRESS2]

no range [IP_ADDRESS]

no range [IP_ADDRESS1] [IP_ADDRESS2]

no range all
Parameter
IP_ADDRESS
IP_ADDRESS1
IP_ADDRESS2
[Capwap Access Controller Address Configuration]
Up to three IP addresses for a Capwap controller can be configured or deleted. Also, all
Capwap controller addresses can be deleted using the 'no capwap-dhcp-option' command.

capwap-dhcp-option [IP_ADDRESS]

no capwap-dhcp-option
Parameter
IP_ADDRESS
[Configuring Option Data]
Use the 'user-option' command to configure or delete the DHCP option. Use 'no' to delete
each option and use 'no user-option all' to delete all the options.

Option: Up to 254 can be entered (1-254).

Data type: string (character string), octet (hex string), int (32 bit integer), uint (32-bit
unsigned integer), int16 (16-bit integer), uint16 (16-bit unsigned integer), ipaddress (IP
address)
Samsung Electronics America
Configures whether to use ping check (default: disable)
IP address. Use to configure one IP address.
Start address of IP address range
Last address of IP address range
IP address of the Capwap Controller
Description
Description
Description
Version 5.2
page 222 of 533