WEC8500/8050 Operation Manual
4.2.5.2
Real-time Interface Statistics Information
Configuration using CLI
1) Go to configure AP configuration.
WEC8500# configure terminal
WEC8500/configure# ap ap_1
WEC8500/configure/ap ap_1#
2) Configure to make real-time interface statistics information updated periodically.
WEC8500/configure/ap ap_1# get-if-stats
3) To check the interface statistics information of an AP, use the 'show ap if-stats
[AP_NAME]' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Monitor> and then select the
<Statistics> <AP Ports> menu in the sub-menus.
As shown below, you can retrieve the real-time interface statistics of the AP.
Select an item in the list, and then you can check detail information.
Samsung Electronics America
Figure 82. AP Ports window
Figure 83. AP Ports detail information window
Version 5.2
page 174 of 533