Samsung WEC8500 Operation Manual page 41

WEC8500/8050 Operation Manual
Command error
When a command that is not supported by the system is entered, an error message is
displayed.
WEC8500# command-unknown
Error : Command 'command-unknown' does not exist
When a parameter that is not supported by a command is entered, an error message
according to the situation is displayed.
WEC8500# configure test
% Invalid parameter (mandatory)
Command modes
When the 'exit' command is entered, the mode is changed to the upper command mode.
Samsung Electronics America
^
^
Version 5.2
page 41 of 533