Samsung WEC8500 Operation Manual page 58

WEC8500/8050 Operation Manual
[clear mac address-table dynamic bridge]
This command deletes the filtering database of bridge operation.

clear mac address-table dynamic bridge [BRIDGE_NAME]

clear mac address-table dynamic [address/interface/vlan] [WORD] bridge [NAME]
Parameter
KIND
WORD
BRIDGE_NAME
[show bridge]
This command retrieves bridge information.

show bridge
[show interface switchport bridge]
This command retrieves the bridge information, i.e. the layer 2 protocol characteristic
information of the current VLAN, of a switch port.

show interface switchport bridge [BRIDGE_NAME]
Parameter
BRIDGE_NAME
[switchport]
This command configures a switch port, i.e. the layer 2 protocol characteristic information
of the current VLAN. The 'no' parameter is used for default configuration. Go to interface
mode and then execute the command.

switchport

no switchport
Samsung Electronics America
Filtering database type (address/vlan/interface)
- address: Filtering database using a MAC address
- vlan: Filtering database using the VLAN information.
- interface: Filtering database using the interface information
Option
Bridge name
Description
Description
Bridge name
Version 5.2
page 58 of 533