Samsung WEC8500 Operation Manual page 100

WEC8500/8050 Operation Manual
WEC8500/configure/interface ge2# ip ospf ?
address
authentication
authentication-key
cost
database-filter
and flooding
dead-interval
declared dead
disable
hello-interval
message-digest-key
(key)
mtu
mtu-ignore
network
priority
retransmit-interval
state advertisements
transmit-delay
DISABLE OSPF configuration
WEC8500/configure/interface ge2# ip ospf disable ?
all
WEC8500/configure/interface ge2# ip ospf disable all ?
<cr>
WEC8500/configure/interface ge2# ip ospf disable all
MTU configuration
The default does not use Maximum Transmission Unit (MTU) configuration.
The range of MTU user configuration is 576-65535.
WEC8500/configure/interface ge2# ip ospf mtu ?
576 - 65535
WEC8500/configure/interface ge2# ip ospf mtu 600
WEC8500/configure/interface ge2#
Network Type configuration
The network type includes 4 types, i.e. broadcast, non-broadcast, point-to-point, and
point-to-multipoint. The Ethernet is broadcast configuration.
WEC8500/configure/interface ge2# ip ospf network ?
broadcast
network
non-broadcast
Samsung Electronics America
Address of interface
Enable authentication
Authentication password (key)
Interface cost
Filter OSPF LSA during synchronization
Interval after which a neighbor is
Disable OSPF
Time between HELLO packets
Message digest authentication password
OSPF interface MTU
Time between HELLO packets
Network type
Router priority
Time between retransmitting lost link
Link state transmit delay
All functionality
Specify OSPF broadcast multi-access
Specify OSPF NBMA network
Version 5.2
page 100 of 533