Wi-Fi Qos Configuration - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
6.2

Wi-Fi QoS Configuration

The APC provides various QoS in the wire/wireless section for every packet type (voice,
video, best-effort, or background). The QoS can be configured for each wireless section
(2.4 GHz, 5 GHz).
6.2.1 QoS Configuration of Wireless Terminal
The system provides probable QoS by changing the Enhanced Distributed Channel Access
(EDCA) parameter in a wireless section.
Configuration using CLI
To configure an EDCA profile in the upward wireless section of a wireless terminal,
execute the command as follows:
1) Go to configure  radio mode to configure of CLI.
APC# configure terminal
APC/configure# [80211a/80211bg]
2) Apply the EDCA profile.

edca-parameters [PROFILE] station
Parameter
PROFILE
3) To check the application status of a configured EDCA profile, use the 'show 80211a
[80211bg] qos edca-parameters wmm_default_sta' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Radio> <802.11a/n> or <802.11b/g/n>  <QoS> menu in the sub-menus.
In the Qos menu, there are Wired and Wireless tab. To change the Station EDCA parameter,
select the Wired tab. If you want to change the AP EDCA parameter to configure the QoS
of an AP wireless section, select the Wireless tab.
Samsung Electronics America
Configures each EDCA profile (wmm_default_sta/wmm_default_ap/
edca_user1/edca_user2).
Description
Version 5.2
page 244 of 533