WEC8500/8050 Operation Manual
no remote-ap-group [REMOTE_AP_GROUP_NAME]
3) Configure Primary Radius Server 1, Primary Radius Server 2, and Primary Radius
Server 3. The RADIUS server information must be created in the radius of the security
item in advance. To delete the configured RADIUS server information, enter 'no'
parameter in front of the command.
primary-radius [RADIUS_SERVER_INDEX]
no primary-radius [RADIUS_SERVER_INDEX]
secondary-radius [RADIUS_SERVER_INDEX]
no secondary-radius [RADIUS_SERVER_INDEX]
tertiary-radius [RADIUS_SERVER_INDEX]
no tertiary-radius [RADIUS_SERVER_INDEX]
4) Use the 'show remote-ap-group detail [REMOTE AP GROUP NAME]' command to
check the remote AP group information.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Remote AP Groups> menu in the sub-menus. After selecting the name of a remote AP
group, you can configure the Radius server or add/remove users under the 'Local
Authentication' tab.
Figure 71. Local Authentication Configuration Window for Remote AP Group
Samsung Electronics America
Version 5.2
page 158 of 533