Configuring Mac Authentication - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
INDEX
TYPE
IP ADDRESS
SHARED SECRET FORMAT
SHARED SECRET
CONFIRM SHARED SECRET
AUTH PORT NUMBER
ACCT PORT NUMBER
RETRANSMIT INTERVAL
TOTAL RETRANSMIT COUNT
RETRANSMIT COUNT
FAILOVER
8.1.1.2

Configuring MAC Authentication

The MAC authentication of a RADIUS server is configured as follows:
Configuration using CLI
1) Go to configure  security  radius configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# security
WEC8500/configure/wlan 1/security# radius 1
WEC8500/configure/security/radius 1#
Samsung Electronics America
Item
ID that distinguishes RADIUS server configurations
Selects the type of the RADIUS server
- Auth: Performs authentication
- Acct: Performs accounting
- Auth/Acct: Performs authentication and accounting
IP address of the RADIUS server
Key input format for communications with the RADIUS server
- ASCII: ASCII strings
- HEX: Hexadecimal values
Key for RADIUS server communications
Re-enters the key for RADIUS server communications for
confirmation
Number of the communication port for RADIUS server
authentication
(range: 1-65,535, default value: 1,812)
Number of the communication port for RADIUS server
accounting
(range: 1-65,535, default value: 1,813)
Retransmission interval for a RADIUS message
(range: 1-60, default value: 2, unit: seconds)
Maximum retransmission count of a RADIUS message
(range: 1-20, default value: 10)
Maximum retransmission count of a RADIUS message before
a RADIUS server failover is attempted
(range: 1-10, default value: 3, must be smaller than the TOTAL
RETRANSMIT value)
Description
Version 5.2
page 318 of 533