WEC8500/8050 Operation Manual
4.2.4.3
AP Mode Configuration
Configuration using CLI
To configure AP mode, execute the command as follows.
1) Go to configure AP configuration AP profile mode of CLI.
WEC8500# configure terminal
WEC8500/configure# ap ap_1
WEC8500/configure/ap ap_1# profile
WEC8500/configure/ap ap_1/profile#
2) Configure the AP mode.
ap-mode [MODE]
Parameter
MODE
3) To check the information of a configured AP, use the 'show ap detail [AP_NAME]'
command.
Samsung Electronics America
Figure 77. AP Profile Setting (2)
AP operation mode (generalAp/rootAp/repeaterAp/snifferAp)
- generalAp: Typical operation mode. Default value.
- rootAp: AP mode where a repeater AP can be connected.
- repeasterAp: AP mode that is connected to a wireless area and the APC
through the root AP.
- snifferAp: AP mode where the packets operating in a wireless
environment can be captured.
Description
Version 5.2
page 168 of 533