Samsung WEC8500 Operation Manual page 102
Controller
Hide thumbs
Also See for WEC8500:
- Operation manual (689 pages) ,
- Maintenance manual (88 pages) ,
- Operation manual (673 pages)
Table of Contents
Advertisement
WEC8500/8050 Operation Manual
WEC8500/configure/interface ge2# ip ospf dead-interval 30 ?
<cr>
WEC8500/configure/interface ge2# ip ospf dead-interval 30
Hello-interval configuration
The default hello-interval is 10 seconds. In addition, operator can change it to a value
between 1 second and 65535 seconds.
WEC8500/configure/interface ge2# ip ospf hello-interval ?
1 - 65535
WEC8500/configure/interface ge2# ip ospf hello-interval 50 ?
<cr>
WEC8500/configure/interface ge2# ip ospf hello-interval 50
WEC8500/configure/interface ge2#
Retransmit-interval configuration
The default retransmit-interval is 5 seconds. In addition, operator can change it to a
value between 1 second and 65535 seconds.
WEC8500/configure/interface ge2# ip ospf retransmit-interval ?
1 - 65535
WEC8500/configure/interface ge2# ip ospf retransmit-interval 100 ?
<cr>
WEC8500/configure/interface ge2# ip ospf retransmit-interval 100
WEC8500/configure/interface ge2#
TRANSMIT DELAY configuration
The default transmit-delay is 1 second. In addition, operator can change it to a value
between 1 second and 65535 seconds.
WEC8500/configure/interface ge2# ip ospf transmit-delay ?
1 - 65535
WEC8500/configure/interface ge2# ip ospf transmit-delay 400
WEC8500/configure/interface ge2#
MTU IGNORE configuration
The default configuration is Disable. If you configure CLI, it is changed to Enable.
WEC8500/configure/interface ge2# ip ospf mtu-ignore ?
<cr>
WEC8500/configure/interface ge2# ip ospf mtu-ignore
WEC8500/configure/interface ge2#
Samsung Electronics America
Seconds
Seconds (default: 5)
Seconds
Version 5.2
page 102 of 533
- Quick Links:
- Network Configuration
- Using Web Ui
Hide quick links:
Advertisement
Table of Contents
