Managing Old License Key - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual

10.6.2 Managing Old License Key

An old license key can differ in regard to the number of manageable APs, whether to
support the VQM function, whether to support the firewall function, and the period of use
of a function.
A license key is unique for each system and it consists of encrypted 53 characters.
A license key is distributed in a file or text format.
Configuration using CLI
To configure a license key related function, go to license mode by executing the following
command.
WEC8500# configure terminal
WEC8500/configure# system license
WEC8500/configure/system/license#
[Installing License Key]
When the system is shipped out, basically there is no registered license key. Therefore, you
must install the license key you received right after the first system installation. You can
install a license key directly or remotely using CLI.

install-key: Registers a file. If a license key file exists in a specified folder, use the
license key file for registration. Once it is installed, the license key file is deleted from
the system.

install-key [LICENSE_KEY]: Direct registration

install-key [IP_ADDRESS] [PORT_NUMBER] [ID] [PASSWORD] [PATH]: Remote
registration
Samsung Electronics America
Installation
APC system can install/register only one official license key and one temporary
license key. A license key (temporary license Key) with time duration can be
installed only 3 times.
Use period
An official license key has no restriction on use period.
A temporary license key has a restriction on use period and the period can be 1,
30, or 60-day.
Apply
A license key becomes active only after system rebooting after the key is installed
or deleted.
Version 5.2
page 401 of 533