Making A Copy - Xerox VersaLink B405 User Manual

®
Xerox Apps

Making a Copy

To make a copy:
1. At the printer control panel, press the Home button.
2. To clear previous App settings, touch Reset.
3. Load your original documents.
• Use the document glass for single pages or paper that cannot be fed using the duplex automatic
document feeder. Lift the automatic document feeder, then place the original document face
down in the upper-left corner of the document glass.
• For multiple, single, or 2-sided pages, use the duplex automatic document feeder. Remove any
staples or paper clips from the pages. Insert the original documents face up in the automatic
document feeder, with the top of the page entering the feeder first. Adjust the paper guides so
that they fit against the document originals.
4. Touch Copy, then enter the number of copies needed.
Note
To amend the number of copies entered, touch the X button, then enter the required quantity.
5. If scanning from 2-sided original documents, touch 2-Sided, then select an option.
6. Adjust copy settings as needed.
For details about available features, refer to
7. Touch Start. If you placed documents in the feeder, scanning continues until the feeder is empty.
8. If you are scanning from the document glass, when prompted, do one of the following:
• To complete the job and return to the Copy app, touch Done.
• To scan another page, load a new original document on the document glass, then touch Add
Page.
• To delete the scan and return to the Copy app, touch Cancel, then touch Delete.
4-18
Apps Features.
Xerox ® VersaLink ® B405 Multifunction Printer
User Guide