Xerox VersaLink B405 User Manual page 26

Getting Started
Item Name
5 Status LED
6 Notification Banner
7 Pause Button
2-4
Description
When the printer is powered off, this button powers on the
printer.
• When the printer is powered on, pressing this button displays
a menu on the control panel. From this menu, you can choose
to enter Sleep mode, restart, or power off the printer.
• When the printer is powered on, but in a low-power mode or
Sleep mode, pressing this button wakes the printer.
• When the printer is powered on, holding this button for 10-
seconds turns off the printer.
This button also blinks to indicate the power status of the printer.
• When the light blinks slowly, the printer is in low-power mode
or Sleep mode.
• When the light blinks rapidly, the printer is powering down,
or exiting a low-power mode.
This light blinks blue or amber to indicate printer status.
Blue
• Blinks blue once to acknowledge a successful Authentication
request.
• Blinks blue once slowly for a copy or print job initiated at the
control panel.
• Blinks blue twice slowly for fax or print job received from the
network.
• Blinks blue rapidly while the printer is powering up, or to signal
detection of a Wi-Fi Direct connection request.
Amber
• Blinks amber to indicate an error condition or warning that
requires your attention. For example, an out of toner condition,
a paper jam, or out of paper for the current job.
• It also blinks amber to indicate a system error, which typically
is associated with an error code.
Notifications and messages are displayed in a pop-up banner
below the apps area. To view the full notification, touch the down
arrow. After you have reviewed the information, touch X to close.
When a job is being scanned or processed, a Pause icon appears
in the notification banner area. To pause the current job, touch
the Pause icon. The job pauses with the option to resume or delete
the job.
® ®
Xerox VersaLink B405 Multifunction Printer
User Guide