Show Igmp_Snooping - D-Link DES-1210-52/ME Cli Reference Manual

Restrictions
Example usage:
TTo disable IGMP snooping on the Switch:

show igmp_snooping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show igmp snooping:
DES-1210-52/ME:5# show igmp_snooping vlan default
Command: show igmp_snooping vlan default
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
VLAN or forward mcrouter for IGMP Snooping on the Switch.
Only Administrator or operator-level users can issue this command.
DES-1210-52/ME:5# disable igmp_snooping
Command: disable igmp_snooping
Success.
DES-1210-52/ME:5#
To show the current status of IGMP snooping on the Switch.
show igmp_snooping {vlan <vlan_name 32> | vlanid <vidlist> |
multicast_vlan <vlan_name 32> | multicast_vlan_group
<vlan_name 32>}
The show igmp_snooping command displays the current IGMP
snooping configuration on the Switch.
<vlan_name 32> − The name of the VLAN for which IGMP snooping
configuration is to be displayed. Up to 32 characters can be used.
<vidlist> − The vid of the VLAN for which IGMP snooping
configuration is to be displayed.
None.
IGMP Snooping Global State
Max Learned Entry Value
Forward Router Only
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Querier State
Querier Role
Querier IP
Querier Expiry Time
State
Fast Leave
Report Suppression
: Enable
: 512
: Disable
: default
: 125
: 10
: 2
: 1
: Disable
: Non-Querier
: 0.0.0.0
: 0
: Enable
: Disable
: Enable
269