Disable Bpdu_Protection; Show Bpdu_Protection - D-Link DES-1210-52/ME Cli Reference Manual

DES-1210-52/ME:5# enable bpdu_protection
Command: enable bpdu_protection
Success.
DES-1210-52/ME:5#

disable bpdu_protection

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable BPDU attack protection on the entire Switch:
DES-1210-52/ME:5# disable bpdu_protection
Command: disable bpdu_protection
Success.
DES-1210-52/ME:5#

show bpdu_protection

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display global settings for BPDU protection:
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
Used to globally disable BPDU attack protection on the Switch.
disable bpdu_protection
The disable bpdu_protection command is Use this to disable
BPDU attack protection on the entire Switch. Note that if BPDU
attack protection is disabled globally, it will also be disabled for ports
regardless of the config bpdu_protection ports settings.
None.
Only administrator-level users can issue this command.
Used to display BPDU attack protection settings on the Switch.
show bpdu_protection {ports <portlist>}
The show bpdu_protection command is used to view the global or
per port BPDU attack protection configuration.
ports – Specify to view the BPDU attack protection port
configuration.
<portlist> – Specify the ports to display. If none is specified, all ports
BPDU attack protection configuration will be listed.
None.
244