Enable Dhcp_Local_Relay; Disable Dhcp_Local_Relay - D-Link DES-1210-52/ME Cli Reference Manual

Command: show dhcp_relay
DHCP/BOOTP Relay Status
DHCP/BOOTP Relay Enable Portlist : 1-52
DHCP/BOOTP Relay Enable VID List : 1,
DHCP/BOOTP Hops Count Limit
DHCP/BOOTP Relay Time Threshold : 0
DHCP Relay Agent Information Option 82 State
DHCP Relay Agent Information Option 82 Check
DHCP Relay Agent Information Option 82 Policy : Replace
DHCP Relay Agent Information Option 82 ID
DHCP Relay Agent Information Option 82 Circuit ID Type : Default
DHCP Relay Agent Information Option 82 Remote ID Type : Default
Interface
---------
System
DES-1210-52/ME:5#

enable dhcp_local_relay

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the DHCP Local Relay:

disable dhcp_local_relay

Purpose
Syntax
Description
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
Server 1 Server 2
--------------- --------------- --------------- ---------------
10.90.90.95
To enable the DHCP local relay feature globally.
enable dhcp_local_relay
The enable dhcp_local_relay command enables the DHCP local
relay feature on the Switch.
None.
Only Administrator, operator or power user-level users can issue this
command.
DES-1210-52/ME:5# enable dhcp_local_relay
Command: enable dhcp_local_relay
Success.
DES-1210-52/ME:5#
To disable the DHCP local relay feature globally
disable dhcp_local_relay
The disable dhcp_local_relay command disables the DHCP local
relay feature on the Switch.
: Enabled
: 12
: Enabled
: Disabled
Server 3 Server 4
121