Show Ethernet_Oam Ports - D-Link DES-1210-52/ME Cli Reference Manual

Example usage:
To show Ethernet OAM statistics of port 1:
DES-1210-52/ME:5# show ethernet_oam ports 1 statistics
Command: show ethernet_oam ports 1 statistics
Port 1
--------------------------------------------------------------------
Information OAMPDU Tx
Information OAMPDU Rx
Unique Event Notification OAMPDU Tx
Unique Event Notification OAMPDU Rx
Duplicate Event Notification OAMPDU Tx: 0
Duplicate Event Notification OAMPDU Rx: 0
Loopback Control OAMPDU Tx
Loopback Control OAMPDU Rx
Variable Request OAMPDU Tx
Variable Request OAMPDU Rx
Variable Response OAMPDU Tx
Variable Response OAMPDU Rx
Organization Specific OAMPDUs Tx
Organization Specific OAMPDUs Rx
Unsupported OAMPDU Tx
Unsupported OAMPDU Rx
Frames Lost Due To OAM
DES-1210-52/ME:5#

show ethernet_oam ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show port 1 external OAM event:
DES-1210-52/ME:5# show ethernet_oam ports 1 event_log index 1
Command: show ethernet_oam ports 1 event_log index 1
Port 1
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
Used to display for Ethernet OAM event log.
show ethernet_oam ports [<portlist> | all] event_log {index
<value_list>}
The show ethernet_oam ports command is used to show ports
Ethernet OAM event log information. The Switch can buffer 1000
event logs. The event log is different from sys-log. It provides more
detailed information than sys-log. Each OAM event will be recorded
in both OAM event log and system log.
[<portlist> | all] − Specifies a port, a range of ports or all ports to be
displayed.
index <value_list> − Specifies an index range to display.
None.
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
251