Show Mld_Snooping Group; Show Mld_Snooping Mrouter_Ports - D-Link DES-1210-52/ME Cli Reference Manual

Example usage:
To display the MLD snooping forwarding:
DES-1210-52/ME:5# show mld_snooping forwarding all
Command: show mld_snooping forwarding all
Total Entries : 0
DES-1210-52/ME:5#

show mld_snooping group

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the MLD snooping groups:
DES-1210-52/ME:5# show mld_snooping group all
Command: show mld_snooping group all
Total Entries : 0
DES-1210-52/ME:5#

show mld_snooping mrouter_ports

Purpose
Syntax
Description
Parameters
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
To display mld snooping group settings on the Switch.
show mld_snooping group [vlan_name <string 32> | vlanid
<vidlist> | all | ports <portlist>]
The show mld_snooping group command displays the multicast
groups that were learned by MLD snooping.
vlan_name <string 32> – The name of the VLAN for which to view
the MLD snooping group configurations.
vlanid <vidlist> – The id of the VLAN for which to view the MLD
snooping group configurations.
all – Displays that all MLD snooping which configured for all VLANs
on the Switch.
ports <portlist> – The ports of the VLAN for which to view the MLD
snooping group configurations.
None.
To display information on dynamically learnt and static multicast
router interfaces.
show mld_snooping mrouter_ports [vlan_name <string 32> |
vlanid <vidlist> | all ] [dynamic | static]
The show mld_snooping mrouter_port command displays on
dynamically learnt and static multicast router interfaces.
vlan_name <string 32> – Specifies on which VLAN mld snooping
groups should be shown.
vlanid <vidlist> – Displays that the mld snooping applies only to this
previously created VLAN id.
all – Displays that all MLD snooping which configured for all VLANs
288