Smtp Sent_Testmsg - D-Link DES-1210-52/ME Cli Reference Manual

Syntax
Description
Parameters
Restrictions
Example usage:
To display SMTP information on the Switch:

smtp sent_testmsg

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To send SMTP test message to all mail receivers:
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
show smtp
The show smtp command displays the SMTP server settings on the
Switch.
None.
None.
DES-1210-52/ME:5# show smtp
Command: show smtp
smtp status : Enable
smtp server address : 0.0.0.0
smtp server port : 25
self mail address : dlink@mail.com.tw
Index Mail Receiver Address
-------- --------------------------------------
1
2
3
4
5
6
7
8
DES-1210-52/ME:5#
To send test messages to all mail recipients configured on the
Switch.
smtp sent_testmsg
The smtp sent_testmsg command is used to send test messages
to all mail recipients configured on the Switch.
None.
Only Administrator and Operator-level users can issue this
command.
DES-1210-52/ME:5# smtp sent_testmsg
Command: smtp sent_testmsg
Subject: This is a SMTP test
Content: Hello everybody!!
38