Delete 802.1X User; Config 802.1X Capability Ports - D-Link DES-1210-52/ME Cli Reference Manual

DES-1210-52/ME:5# show 802.1x user
Command: show 802.1x user
Index
------------ ---------------
Total Entries: 1
Success.
DES-1210-52/ME:5#

delete 802.1x user

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the 802.1x user:
DES-1210-52/ME:5# delete 802.1x user dlink
Command: delete 802.1x user dlink
Success.
DES-1210-52/ME:5#

config 802.1x capability ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure capability ports to the 802.1x on the Switch:
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
Username
1 dlink
Deletes network access to a 802.1x user.
delete 802.1x user <username 15>
The delete 802.1x user command deletes network access to a
802.1x user.
<username 15> − The name of the 802.1x user to be deleted.
Only Administrator, operator or power user-level users can issue this
command.
Defines a port or range of ports to be members of the Guest VLAN.
config 802.1x capability ports [<portlist> | all] [authenticator |
none]
Th config 802.1x capability ports is used to configure the
capability for the 802.1x on the Switch.
<portlist> – A port or range of ports to be configured to the 802.1x
capability.
all – Indicates all ports to be configured to the 802.1x capability.
[authenticator | none] – Specifies the 802.1x capability port to be
authenticator or none.
Only Administrator, operator or power user-level users can issue this
command.
314