Reboot - D-Link DES-1210-52/ME Cli Reference Manual

Example usage:
To reload the Switch:
DES-1210-52/ME:5# reload config config_id 1
Command: reload config config_id 1
Are you sure you want to reload the config?(y/n)y
% Reload config 1 Success.fully.
Are you sure you want to proceed with the system reboot?(y/n)y
% Please wait, the switch is rebooting...

reboot

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restart the Switch:
DES-1210-52/ME:5# reboot
Command: reboot
Copyright(C) 2012 D-Link Corporation. All rights reserved.
DES-1210-52/ME UserName: System will Reboot....
U-Boot 2011.12.41872 (Feb 06 2015 - 19:32:31)
Board: RTL839x CPU:700MHz LXB:200MHz MEM:300MHz
DRAM: 256 MB
SPI-F: 1x32 MB
Loading 1024B env. variables from offset 0xc0000
Switch Model: RTL8353M_DEMO (Port Count: 52)
Switch Chip: RTL8353M
Model Info: 83536802
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
To reboot the Switch. If the Switch is a member of a stack, it may be
rebooted individually, without affecting the other members of the
stack.
reboot
The reboot command restarts the Switch.
None.
Only Administrator -level users can issue this command.
DES-1210-52/ME Fast Ethernet Switch
Command Line Interface
Firmware: Build 20.01.B045
21