Disable Ssl; Show Ssl - D-Link DES-1210-52/ME Cli Reference Manual

DES-1210-52/ME:5# enable ssl
Command: enable ssl
Note: HTTP will be disabled if SSL is enabled.
Success.
DES-1210-52/ME:5#

disable ssl

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the SSL status on the Switch:
DES-1210-52/ME:5# disable ssl
Command: disable ssl
Success.
DES-1210-52/ME:5#

show ssl

Purpose
Syntax
Description
Parameters
Restrictions
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
To disable the SSL function on the Switch.
disable ssl {ciphersuite [DH-RSA-3DES-SHA1 | DH-RSA-DES-
SHA1 | RSA-3DES-SHA1 | RSA-DES-SHA1 | RSA-EXP1024-DES-
SHA1 | RSA-NULL-MD5 | RSA-NULL-SHA1]}
The disable ssl command disables SSL on the Switch and can be
used to disable all combinations of listed ciphersuites on the Switch.
Note that disabling SSL will not enable WEB access automatically
(WEB access will stay disabled), and you'll need to enable it
manually.
ciphersuite - A security string that determines the exact
cryptographic parameters, specific encryption algorithms and key
sizes to be used for an authentication session. The user may choose
any combination of the following:

DH-RSA-3DES-SHA1

DH-RSA-DES-SHA1

RSA-3DES-SHA1

RSA-DES-SHA1

RSA-EXP1024-DES-SHA1

RSA-NULL-MD5

RSA-NULL-SHA1
Only administrator-level users can issue this command.
To view the SSL status and the certificate file status on the Switch
show ssl
The show ssl command displays the SSL status and the certificate
file status on the Switch.
None.
None.
357