Delete Cos Ip_Mapping; Config Cos Ipv6_Mapping; Show Cos Ipv6_Mapping - D-Link DES-1210-52/ME Cli Reference Manual

delete cos ip_mapping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the CoS ip mapping on the Switch:
DES-1210-52/ME:5# delete cos ip_mapping destination_ip 10.90.90.96
Command: delete cos ip_mapping destination_ip 10.90.90.96
Success!
DES-1210-52/ME:5#

config cos ipv6_mapping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the CoS IPv6 mapping on the Switch:
DES-1210-52/ME:5# config cos ipv6_mapping destination_ipv6 3000::1 class 1
Command: config cos ipv6_mapping destination_ipv6 3000::1 class 1
Success.
DES-1210-52/ME:5#

show cos ipv6_mapping

Purpose
Syntax
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
To remove the CoS IP mapping method.
delete cos ip_mapping destination_ip <ipaddr>
The delete cos ip_mapping command is used to delete the CoS IP
mapping method on the Switch.
<ipaddr> - Specifies the IP address to be removed.
Only administrator or operator-level users can issue this command.
To configure the CoS IPv6 mapping method.
config cos ipv6_mapping destination_ipv6 <ipv6addr> class
<class_id 0-3>
The config cos ipv6_mapping command is used to configure the
CoS IPv6 mapping method on the Switch.
<iv6paddr> - Specifies the IPv6 address to be mapped. For
example, 3000::1.
<class_id 0-3> - Specifies the number of the Switch's hardware
priority queue.
Only administrator or operator-level users can issue this command.
To display the CoS IPv6 mapping method.
show cos ipv6_mapping {destination_ipv6 <ipv6addr>}
187