Delete Snmp Group - D-Link DES-1210-52/ME Cli Reference Manual

Restrictions
Example usage:
T o create an SNMP group named 'sg1:

delete snmp group

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named 'sg1':
DES-1210-52/ME:5# delete snmp group sg1 v1
Command: delete snmp group sg1 v1
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
encryption of packets sent between the Switch and a remote SNMP
manager.
auth_priv − Specifies that authorization is required, and that packets
sent between the Switch and a remote SNMP manger are
encrypted.
read_view – Specifies that the SNMP group being created can
request SNMP messages.

<view_name 32> − A string of up to 32 objects that a remote
SNMP manager is allowed to access on the Switch.
write_view – Specifies that the SNMP group being created has write
privileges.

<view_name 32 identifies the group of MIB objects that a
remote SNMP manager is allowed to access on the Switch.
notify_view − Specifies that the SNMP group being created can
receive SNMP trap messages generated by the Switch's SNMP
agent.

<view_name 32> − A string of up to 32 alphanumeric
characters that identifies the group of MIB objects that a
remote SNMP manager is allowed to access on the Switch.
Only administrator, operate or power user-level users can issue this
command.
DES-1210-52/ME:5# create snmp group sg1 v1 notify_view
sg1
Command: create snmp group sg1 v1 notify_view sg1
Success.
DES-1210-52/ME:5#
To remove an SNMP group from the Switch.
delete snmp group <groupname 32> [v1 | v2c | v3 [auth_priv |
noauth_nopriv]]
The delete snmp group command removes an SNMP group from
the Switch.
<groupname 32> − A string of that identifies the SNMP group the
new SNMP user will be associated with. Up to 32 alphanumeric
characters.
Only administrator, operate or power user-level users can issue this
command.
85