Show Ipif; Show Ipv6 - D-Link DXS-1210 Series User Manual

5 Command Line Interface
Restrictions
Example usage:
To restore all of the Switch's parameters to their default values:
DXS-1210-12TC> reset config
This command will clear all of system configuration as factory. System will
reboot after clearing. Do you want to continue? (y/n)y
DXS-1210-12TC>

show ipif

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IP interface settings:
DXS-1210-12TC> show ipif
IP Setting Mode
Interface Name
Interface Vlan Name
IP Address
Subnet Mask
Total Entries: 1
DXS-1210-12TC>

show ipv6

Purpose
Syntax
Description
Parameters
Restrictions
Only Administrator can issue this command.
To display the configuration of an IP interface on the Switch.
show ipif [<short <1-4094>>]
The show ipif command displays the current IP address of the
switch.
[<short <1-4094>>] - Specify the interface to be displayed.
None.
:manual
:vlan1
:default
:10.90.90.90
:255.0.0.0
To display the configuration of an IPv6 interface on the Switch.
show ipv6 interface [<short <1-4094>>] [brief]
The show ipv6 command displays the current IPv6 address of
the switch.
[<short <1-4094>>] - Specify the interface to be displayed.
[brief] – Specify the brief of interface to be showed.
None.
1 0 5
1 0 5
D-Link DXS-1210 Series User Manual