Show Cpu Port - D-Link DES-1210-52/ME Cli Reference Manual

Syntax
Description
Parameters
Restrictions
Example usage:
To trace route IPv6 3000::2 with max-ttl is 8:
DES-1210-52/ME:5# traceroute6 3000::2 max-ttl 8
Command: traceroute6 3000::2 max-ttl 8
Tracing Route to 3000::2 with 8 hops max and 1 byte packets
[!N - Network Unreachable !H - Host Unreachable !P - Protocol Unreachable]
1 ::
2 ::
3 ::
4 ::
5 ::
6 ::
7 ::
8 ::
DES-1210-52/ME:5#

show cpu port

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the CPU port information:
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
traceroute6 <ipv6_addr> {[max-ttl <short 1-99> | min-ttl <short
1-99>}
The traceroute6 command discovers routes that packets actually
take when traveling to their destination.
<ipv6_addr> - Specifies the IPv6 address of the destination host.
max-ttl <short 1-99> - The largest TTL value that can be used.
The traceroute command
reached or when this value is reached.
min-ttl <short 1-99> - The smallest TTL value that can be used.
The traceroute command
reached or when this value is reached.
Only Administrator or operate-level users can issue this command.
*
*
*
*
*
*
*
*
To display the CPU port information.
show cpu port
The show cpu port command displays the CPU port information.
None.
Only Administrator users can issue this command.
DES-1210-52/ME:5# show cpu port
Command: show cpu port
Type Total
--------------------------- ---------- -----------
ARP
DHCP
DHCPv6
terminates
terminates
* *
* *
* *
* *
* *
* *
* *
* *
Diff
0
0
0
28
when the destination
when the destination
is
is