Show Stp - D-Link DES-1210-52/ME Cli Reference Manual

Syntax
Description
Parameters
Restrictions
Example usage:
To disable STP on the Switch:

show stp

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the status of STP on the Switch:
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
disable stp
The disable stp command sets the Spanning Tree Protocol to be
globally disabled on the Switch.
None.
Only administrator-level users can issue this command.
DES-1210-52/ME:5# disable stp
Command: disable stp
Success.
DES-1210-52/ME:5#
To display the Switch's current STP configuration.
show stp
The show stp command displays the Switch's current STP
configuration.
None.
None.
DES-1210-52/ME:5# show stp
Command: show stp
STP Bridge Global Settings
-----------------------------------------------
STP Status
STP Version
Bridge Priority
Max Age
Hello Time
Forward Delay
TX Hold Count
Forward BPDU
Root Cost
Root Maximum Age
Root Forward Delay
Root Port
Root Bridge
DES-1210-52/ME:5#
: Enabled
: MSTP
: 32768
: 6
: 2
: 4
: 2
: Enabled
: 0
: 6
: 4
: 0
: 80:00:00:01:02:03:04:05
158