Enable Clipaging; Disable Clipaging; Enable Web - D-Link DES-1210-52/ME Cli Reference Manual

enable clipaging

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable pausing of the screen display when the show command output reaches the end of the page:

disable clipaging

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable pausing of the screen display when the show command output reaches the end of the page:

enable web

Purpose
Syntax
Description
Parameters
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
Used to pause the scrolling of the console screen when a command
displays more than one page.
enable clipaging
The enable clipaging command is used when issuing a command
which causes the console screen to rapidly scroll through several
pages. This command will cause the console to pause at the end of
each page. The default setting is enabled.
None.
Only Administrator or operator-level users can issue this command.
DES-1210-52/ME:5# enable clipaging
Command: enable clipaging
Success.
DES-1210-52/ME:5#
Used to disable the pausing of the console screen scrolling at the
end of each page when a command displays more than one screen
of information.
disable clipaging
The disable clipaging command is used to disable the pausing of
the console screen at the end of each page when a command would
display more than one screen of information.
None.
Only Administrator or operator-level users can issue this command.
DES-1210-52/ME:5# disable clipaging
Command: disable clipaging
Success.
DES-1210-52/ME:5#
To enable the HTTP-based management software on the Switch.
enable web {<tcp_port_number 1-65535>}
The enable web command enables the Web-based management
software on the Switch. The user can specify the TCP port number
the Switch uses to listen for Telnet requests.
<tcp_port_number 1-65535> − The TCP port number. TCP ports are
numbered between 1 and 65535. The 'well-known' port for the Web-
16