Suzuki Madura GV700GL Service Manual page 105

3-75 ENGINE SERVICING
• Install the three kinds of positioning pins and
0-rings properly.
® :
Short positioning pin.
@:
Long positioning pin.
©:
Smaller diam. pin.
• Identify the three different intake pipes accord-
ing to each I. D. code.
CD07A FR RL
@ 07
A F L R R with masking at the seat of screw
@07A FL
RR
• Install a new 0-ring to the intake pipe groove as
shown.
CAUTION:
Always use new 0-rings to prevent sucking air
from the joint part.
• Each intake pipe should position properly as
shown in the illustration.
• Install the ground lead wire for engine Temp.
gauge and fan switch to the No. 2 cylinder's
intake pipe.
• Install a new gasket between the cylinder head
and cylinder.
NOTE:
The head gaskets will only fit on the
cylinders one way with all holes lining up.
• Install the longer chain guide
CD
to the front
cylinder and shorter chain guide to the rear
cylinder.
FRONT
if®
@----4<1D
,.,-,
©
®
FRONT
I.D. code