Suzuki Madura GV700GL Service Manual page 119

SECONDARY DRIVE BEVEL GEAR
• Remove the secondary drive bevel gear cover
and shims by removing the three bolts.
• Remove the 0-rings and draw out the bearing
with the secondary drive bevel gear.
CAUTION:
The removed 0-rings should be replaced with
new ones.
• Remove the secondary drive bevel gear shim.
• Draw out the bearing from the secondary drive
bevel gear by using the bearing puller and
appropriate drift.
09913 - 6151 0 Bearing puller
SHAFT
DRIVE
4-4