Suzuki Madura GV700GL Service Manual page 141

• Remove the shims and spacer from the final
drive bevel gear shaft.
• Remove the bearing from the final drive bevel
gear shaft by using the special tool.
09941 - 84510 Bearing race remover
CAUTION:
The removed bearing should be replaced with
a new one.
• Remove the oil seal by using the special tools,
and then remove the bearing.
09941 - 64510 Bearing and oil seal remover
09930 - 301 02
Sliding shaft
CAUTION:
The removed oil seal should be replaced with
a new one.
• Remove the bearing races from the final drive
bevel gear housing by using the special tools.
09941 - 54911
Bearing race remover
09913 - 80112 Bearing race installer
SHAFT DRIVE 4-26