Suzuki Madura GV700GL Service Manual page 121

• Remove the washer
CD
and coupling ®from the
secondary driven bevel gear shaft.
• Tap the secondary driven bevel gear shaft with a
plastic hammer to remove it from the secondary
driven bevel gear housing.
• Remove the shims and spacer from the seconda-
ry driven bevel gear shaft.
• Remove the bearing from the secondary driven
bevel gear shaft by using the special tool.
09941 - 84510
Bearing race remover
CAUTION:
The removed bearing should be replaced with
a new one.
SHAFT DRIVE 4-6
CD
®