Suzuki Madura GV700GL Service Manual page 253

9-29 CHASSIS
• Check the brake shoe and decide whether it
should be replaced or not from the thickness
of the brake shoe lining.
Service Limit
1.5 mm (0.06 in.)
BRAKE DRUM
Measure the brake drum I.D. to determine the
extent of wear and, if the limit is exceeded by the
wear noted, replace the drum. The value of this
limit is indicated inside the drum.
Service Limit 180.7 mm (7.11 in.)
Inspect the drum I. D. for scratch marks. If the I. D.
surface is scratched or otherwise roughened,
smoothen it with sandpaper.
REASSEMBLY
Reassemble and remount the rear wheel in the
reverse order of disassembly and removal, and also
carry out the following steps:
WHEEL BEARINGS
• Install the wheel bearing by using the special
tool as shown.
CAUTION:
First install the wheel bearing for right side.
09924 - 8451 0 Bearing installer set