Suzuki Madura GV700GL Service Manual page 240

• While holding the caliper mounting portion of
the outer tube by vise, separate the inner tube
from the outer tube as shown.
NOTE:
When separating the inner tube from the
outer tube, both anti-friction metals may be
damaged and replace them with new ones.
• Remove inner tube anti-friction metal.
INSPECTION
FORK SPRING
• Measure the fork spring free length. If it is
shorter than service limit, replace it.
Service Limit 433 mm (17.0 in.)
INNER TUBE AND OUTER TUBE
• Inspect inner tube sliding surface for any
scuffing and check for bend. Inspect outer tube
sliding surface for any scuffing.
CHASSIS 9-16