Suzuki Madura GV700GL Service Manual page 42

• Route the fuel hose properly and connect the
fuel hose to the fuel pump.
CD
Hose to the carburetor
• Install the carburetor to the air chamber and
tighten the intake pipe clamp screws securely.
• Firmly secure the carburetors with the clamps.
If the carburetors are not firmly secured, gas
leakage, incorrect air-fuel ratio and unsatis-
factory engine operation may result.
CARBURETOR TO INTAKE PIPE CLAMPS
FRONT ...
• Install the exhaust pipes, pre-muffler and muf-
flers properly. When securing exhaust pipe
clamp bolts, make sure that clamps are position-
ed properly.
Tightening torque
Exhaust pipe
20-25 N-m
(2.0- 2.5
kg-m)
clamp bolt
(14.5- 18.0
lb-ft)
Muffler mounting
27-43
N-m
(2. 7 - 4.3
kg-m)
bolt
(19.5- 31.0 lb-ft)
ENGINE SERVICING 3-12
AIR CHAMBER TO CARBURETOR CLAMPS
~"o
FRONT ...
~Lo