Suzuki Madura GV700GL Service Manual page 61

3-31 ENGINE SERVICING
NOTE:
*
Discard the removed valve guide subas-
semblies.
*
Only oversized valve guide is available.
• Re-finish the valve guide holes in cylinder head
with a 10.8 mm reamer.
09916 - 34580 Valve guide hole reamer
09916- 34541 Reamer handle
• Fit a ring to each valve guide. Be sure to use
new rings and valve guides. Use of rings and
valve guides removed during disassembly is pro-
hibited. Remember that both valve guides for
intake and exhaust and both oil seals are identi-
cal in shape.
11115 - 05AOO
Valve guide
09289 - 05003
Valve guide oil seal
• Oil the stem hole of each valve guide and drive
the guide into the guide hole with the valve
guide remover and attachment.
09916-44910
09916 - 44920
CAUTION:
Valve guide remover
Valve guide installer
attachment
Failure to oil the valve guide . hole before
driving the new guide into place many result
in a damaged guide or head.
• Install valve spring lower seats.
• After fitting all valve guides, refinish their
guiding bores with a 5.5 mm reamer. Be sure to
clean and oil the guide after reaming.
09916 - 34550
Valve guide reamer
09916- 34541 Reamer handle